Repositioning or resetting your leaning fence is an inexpensive option. However, it requires more effort than simply replacing the fence posts. Adding support braces is an affordable solution as well. If you cannot afford to replace the fence posts, you can use a Fix-a-Fence kit to correct the problem. Read on to learn how to do this. Here are some tips:
Repositioning a leaning fence.
Whether your fence is on your property or shared with a neighbor, you may be able to reposition or reset the posts without tearing down the fence itself. Before starting fence repair Copperas Cove, TX, it is essential to communicate with your neighbor so that both sides of the fence can be easily accessed. If you have to remove part of the fence to reposition or reset the posts, you should unscrew the stringers and pull the post out. If there is limited space for repositioning, you can get help from your neighbors to lift the fence post.
In some cases, repositioning or resetting a leaner fence is cheaper than replacing the posts. For example, leaning posts may be caused by rotting wood at their base, or a large object may have knocked them over. Metal posts may lean due to impact, but you can straighten bent ones, while wood posts may require replacement.
If you’re unsure whether to reposition or reset a leaning fence, try using a “Fix-a-Fence” solution. Using a metal bracket or stake to support the post, you can fix a leaning fence much cheaper than replacing the posts. However, you should be careful with this method, because it can result in flying chips.
Adding support braces
If your fence is falling over, the simplest and quickest way to fix it is to add support braces to the posts. You can install the braces at the back of the posts using a power drill. You can even use a post-up brace, an oblong post that you can drive into the ground with a sledgehammer. Using the brace, you can ensure that the posts are vertical and the panels are correctly placed.
Another option for repairing a leaning fence is to add support braces to the wooden posts. Wooden posts tend to lean over time, so adding support braces will prevent this problem in the future. This method is inexpensive and requires minimal effort and investment. It also works for fence posts that are rooted in concrete footings. Contact a fencing contractor to get a more detailed quote and ask them to assess the damage.
A leaning fence can also be caused by rot at the base of the posts. If the posts are rotting, they should be replaced. If you notice the roots spreading out around the base of the posts, you need to remove the soil around the base of the post. A fence post may shift out of alignment with other posts. A wooden fence may also be leaning because of shifting soil or tree roots that have become too big.
Using a Fix-a-Fence kit
There are several causes of a leaning fence, from old, poorly installed posts to rampaging livestock. No matter what the reason, it needs immediate repair. Repairing a fence that is leaning is more difficult when the posts are located on weak ground. Fix-a-Fence kits, available at most home improvement stores, improve a leaning fence by adding a metal support structure to the bottom of the post.
A Fix-a-Fence kit consists of a metal post or stake that you place into the ground. To install it, dig a hole eight inches below the fence post. Then, use a post-hole digger to dig deeper holes. Next, fill the hole with cement and tie it to the rest of the posts.
Wood fences are vulnerable to rot, so repairing them is a good option for those looking to save money. Repairing wood requires patching and additional support, but it can be costly. Replacing individual posts or rails will add additional costs. While patching rotted wood is viable, professional repairs are a better choice if you can afford it. A repair job can range from $150 to $500, depending on the extent of the damage. If rotting wood is the cause of the lean, you can also apply a chemical treatment to the boards and posts. Finally, the fence may need painting.